Features:
ENDURANCE BEEHIVE® VALVE SPRINGS
Machined from premium-grade hi-tensile chrome silicon single-conical ovate wire
Shot-peened with specially processed thermal heat treat and super NexTex® finish for fatigue life needed to exceed high demands of V-Twin engines
Use a much smaller and lighter weight retainer to reduce valve weight and create quicker rev and smoother motion
Direct bolt-in replacement up to .650" cam lift; no machining or rocker box clearancing required
Available for 5/16", 7mm and 6mm valves
Kits include: Endurance BeeHive® valve springs, Factory retainers, machined spring seats, seat shims, valve locks and a set of premium Viton® valve seals equipped with spring-loaded valve stem wiper system
Twin Cam specs: seat lbs./installed height; 198 lbs. at 1.685" (.535" lift), 194 lbs. at 1.703" (.553" lift), 190 lbs. at 1.724" (.574" lift), 187 lbs. at 1.754" (.604" lift), 185 lbs. at 1.780" (.630" lift), 160 lbs. at 1.800" (.650" lift), 375 lbs. at 1.150" (open height) coil bind at 1.100"
M-Eight specs: seat lbs./installed height; 134 lbs. at 1.375" (.405" lift), 127 lbs. at 1.405" (.435" lift), 125 lbs. at 1.415" (.445" lift), 121 lbs. at 1.435" (.465" lift), 116 lbs. at 1.455" (.485" lift), 113 lbs. at 1.470" (.500" lift), 109 lbs. at 1.490" (.520" lift), 103 lbs. at 1.520" (.550" lift), 226 lbs. at .970" (open height), coil bind at .920"
Feuling® BeeHive® valve springs must be installed at the correct OPEN HEIGHT, matching max lift to the open height spec of the valve springs
Made in the U.S.A.
Feuling® BeeHive® valve spring kits are direct replacement with no machining or rocker box clearance required up to .574" lift for 98-04 Big Twin and 86-03 XL and up to .650" lift for 05-17 Twin Cam. Larger camshafts require valve guide machining for seal to retainer clearance.
Shipping weight: 1.20 lbs
Made in US
Sold as: KT
This is a vehicle specific fit product, please select your vehicle for correct fitment